Upgrade Your Ford F-150 with the Legend BedBoss Truck Bed System

A standard truck bed can only do so much when it comes to organizing, securing, and protecting cargo. The Legend BedBoss Truck Bed System is designed to enhance your Ford F-150, offering a durable, structural floor that integrates seamlessly with your truck’s existing cargo tie-down points.

This step-by-step installation guide walks you through the process of installing the Legend BedBoss in a 2021 Ford F-150 with a 5.5-foot bed, showcasing its durability, ease of installation, and secure fitment.

Watch our full install video here.

Why Install the Legend BedBoss Truck Bed System?

A factory truck bed may be durable, but it lacks the structure and support needed to maximize cargo management. The Legend BedBoss offers:

  • Reinforced Structural Floor – Provides a solid, heavy-duty surface for equipment and cargo.
  • Secure Fitment – Utilizes existing cargo tie-down points for a non-destructive installation.
  • Durability – Built with high-quality composite materials for long-lasting performance.
  • Protection – Helps prevent scratches, dents, and damage to your truck bed.
  • Modular Design – Works with various Ford F-150 models and different bed lengths.

Step-by-Step Installation Guide

Follow these steps to properly install the Legend BedBoss Truck Bed System in your Ford F-150.

1. Gather Tools and Prep the Truck Bed

Before beginning the installation, make sure you have the necessary tools:

  • T30 Torx Bit
  • Impact Driver or Drill
  • Rubber Mallet or Hammer
  • Cleaning Cloth
  • Mild Detergent or Degreaser

Preparing the Truck Bed

  • Park the F-150 on a flat surface and engage the parking brake.
  • Remove any debris, dirt, or grease from the truck bed using a cleaning cloth and mild detergent.
  • Locate the cargo tie-down rings along the side of the truck bed. These will be used to secure the Legend BedBoss system.
  • Using a T30 Torx bit, remove the cargo rings so the new mounting brackets can be installed.

2. Install the T-Nuts into the Composite Panels

The Legend BedBoss panels include pre-drilled holes for securing the system.

  • Locate the pre-drilled holes on the underside of each panel.
  • Insert the included T-nuts into each hole.
  • If the T-nut is slightly larger than the hole, use a rubber mallet to gently tap it into place.
  • Thread a bolt through the top to keep the T-nut aligned as you insert it.

3. Assemble the Frame and Secure to Composite Panels

  • Attach the frame pieces together using the included counter-sunk M6 screws.
  • Start at the front of the truck bed, threading each screw by hand to avoid cross-threading.
  • Secure the composite panels to the frame using:
    • Counter-sunk M4 screws in recessed areas.
    • Flathead M4 screws along the main rails with cargo rings.
    • Lock washers for extra stability.

5. Attach Vehicle Brackets to Cargo Ring Locations

  • Install the vehicle-specific mounting brackets where the original cargo tie-downs were removed.
  • Secure the brackets to the truck bed first, then attach them to the BedBoss frame.
  • Only hand-tighten the bolts at first to allow for final adjustments.

Brackets for Front and Rear Installation

  • Front Brackets – Left and right brackets are interchangeable.
  • Rear Brackets – These are side-specific. Make sure the elongated mounting holes face downward.
  • Apply the included padding to the brackets where they contact the truck bed, ensuring a non-destructive install.

6. Final Adjustments and Tightening

Once all brackets are in place, do a final check to ensure everything is properly aligned.

  • Tighten all bolts securely, but avoid over-tightening.
  • Confirm that the truck bed floor is level and securely attached to the vehicle.
  • Check that the cargo rings remain functional after installation.

How the Legend BedBoss System Improves Your Ford F-150

Once installed, the Legend BedBoss Truck Bed System transforms your F-150’s cargo area into a more durable and organized workspace. Here’s how it improves your truck’s functionality:

  • Stronger, More Stable Cargo Floor – Supports heavy tools, equipment, and materials without flexing.
  • Easier Cargo Management – Provides a flat, even surface for loading and securing cargo.
  • Increased Truck Bed Protection – Helps prevent scratches, dents, and wear over time.
  • Seamless Integration – Uses factory mounting points for a clean, professional look.

Final Thoughts on Installing the Legend BedBoss in a Ford F-150

The Legend BedBoss Truck Bed System is a must-have upgrade for any Ford F-150 owner looking to enhance cargo organization and durability.

  • Provides a structural, heavy-duty floor that integrates with factory tie-downs.
  • Protects the truck bed from damage while improving cargo stability.
  • Offers easy installation with no permanent modifications required.

If you’re ready to upgrade your Ford F-150’s truck bed, check out the Legend BedBoss Truck Bed System today.

Products Featured In This Video