At Upfit Supply, we’re all about practical upgrades that save time and protect your investment. That’s why the BedRug VanRug for the Ford Transit Connect (VRTC14L) is one of our most popular cargo floor solutions. In this guide, we’ll walk you through the full installation—from prep to final fit. In under an hour, you’ll have a durable, carpeted cargo floor featuring industrial-grade material and moisture-wicking backing built to handle daily wear without compromise.

Why Installing BedRug VanRug in Ford Transit Connect – VRTC14L Matters

Firstly, factory vinyl flooring often tears and traps dirt. Moreover, harsh chemicals and tools can damage factory mats. Therefore, BedRug VanRug offers:

  • Custom-Fit Design: Tailored to your 2014–2022 Long WB Transit Connect.
  • Industrial-Grade Carpet: Withstands heavy foot traffic and cargo.
  • Non-Slip Polypropylene Backing: Keeps the mat firmly in place.
  • Easy Maintenance: Hose off surface or vacuum debris.

Consequently, your van remains cleaner, safer, and more professional.

Tools Needed for Installing BedRug VanRug in Ford Transit Connect – VRTC14L

Before you begin Installing BedRug VanRug in Ford Transit Connect – VRTC14L, assemble:

  • Trim removal tools to pry out clips
  • Sharp razor blade for precision cuts
  • Impact driver with Torx T50 bit for d-ring removal
  • Breaker bar for stubborn bolts

Meanwhile, clear the cargo area and park on a stable surface. Consequently, you’ll work efficiently without distractions.

Removing the Factory Flooring

First, remove the four D-rings with your impact driver and T50 bit. Next, pull out the plastic trim clips around the door sill. Meanwhile, a trim removal tool helps ease out the clips without damaging the trim. Afterwards, slide the factory vinyl floor mat straight out. Finally, store your old floor or recycle it responsibly.

Unrolling the BedRug VanRug

Now that the factory floor is gone, it’s time for Installing BedRug VanRug in Ford Transit Connect – VRTC14L:

  1. Unbox and Unroll: Lay the VanRug flat in your cargo area.
  2. Position Forward Edge: Align the front edge under the bulkhead trim.
  3. Smooth It Out: Allow 5–10 minutes for the material to relax.

Moreover, this carpeted floor features fade-resistant color and sound-dampening insulation.

Securing Trim and D-Rings

Next, reinstall door‐sill trims by snapping clips back into place. Meanwhile, slide VanRug cutouts over each D-ring anchor. Afterwards, reconnect each D-ring through its VanRug opening. Consequently, the D-rings blend seamlessly with the mat. Furthermore, the VanRug’s backing locks around the anchors, preventing movement.

Final Adjustments and Benefits

Once you’ve completed Installing BedRug VanRug in Ford Transit Connect – VRTC14L, inspect:

  • Edges: Ensure the mat hugs all contours.
  • Cutouts: Verify D-rings and clips lie flush.
  • Surface: Brush or vacuum any wrinkles.

Finally, load in tools or cargo with confidence. Consequently, spills wipe clean, and the carpet won’t slip underfoot.

Maintenance Tips for VanRug

To prolong your BedRug VanRug’s life:

  • Shake Off Debris: Remove the rug and tap outdoors.
  • Vacuum Regularly: Keep fibers debris-free.
  • Hose Down Mat: Use mild soap as needed—no harsh chemicals.
  • Air Dry Flat: Prevent warping.

Moreover, a quick shake and vacuum keep your Transit Connect looking sharp.

Upgrade Your Transit Connect Today

At Upfit Supply, we know that Installing in Ford Transit Connect – VRTC14L transforms your cargo area. With commercial-grade durability and easy maintenance, this floor mat is a must-have for trades, delivery, and adventure.

Ready for a professional upgrade? Shop now:
BedRug VanRug Cargo Mat for Ford Transit Connect (VRTC14L)

Watch the full install tutorial:Installing BedRug VanRug in Ford Transit Connect – VRTC14L

With Upfit Supply, your van works as hard as you do—no exceptions.

Products Featured In This Video