Loading and unloading heavy equipment in a Ford Transit can be exhausting and time-consuming, especially if you’re manually lifting tool carts, generators, or cargo. Straining your back every day can lead to injuries, downtime, and inefficiency on the job. That’s why installing a Link loading ramp is a game-changer for professionals who rely on their vans for daily work.

The Link LB20 Bi-Fold Cargo Ramp provides a safe, efficient, and easy-to-use solution. With its smooth deployment, durable design, and space-saving bi-fold mechanism, this Link loading ramp makes it effortless to roll equipment in and out of your van. Installing a Link loading ramp can significantly reduce physical strain and increase productivity, making it an essential upgrade for any work van.

In this guide, we’ll walk you through the installation process, highlight key features, and explain why the Link LB20 Cargo Ramp is the ideal solution for your Ford Transit or other cargo van.

Watch the Full Installation Video Here → YouTube Video

  • Bi-Fold Design – Saves space by folding in half when not in use.
  • Heavy-Duty Construction – Built to handle substantial weight loads, ensuring durability.
  • Wheel Kit for Easy Deployment – Allows the ramp to roll out smoothly when opening.
  • Slip-Resistant Surface – Provides excellent traction, even in wet conditions.
  • Secure Mounting System – Ensures the ramp stays firmly in place while in transit.

Step-by-Step Installation Process

Installing the Link LB20 Bi-Fold Cargo Ramp in a Ford Transit requires careful alignment and secure mounting. Follow these steps for a safe and proper installation.

1. Prepare for Installation

Before starting, gather the necessary tools and ensure the work area is clear.

Tools Needed:

  • Drill with metal bits
  • Phillips head screwdriver
  • Plus nut tool
  • Cleaning cloth
  • Mild detergent or degreaser
  • Measuring tape
  • Marker or punch for marking drill holes

Safety Precautions:

  • Park the Ford Transit on a flat surface and engage the parking brake.
  • Turn off the vehicle.
  • Ensure the installation area is dry and free of debris before proceeding.

2. Clean and Prepare the Installation Area

Proper surface preparation is key to a secure fit.

  • Wipe down the cargo floor with a cleaning cloth and mild detergent to remove dirt and grease.
  • Dry the area completely to ensure nothing interferes with the ramp’s mounting.
  • Check for clearance inside the van to confirm the ramp will not obstruct shelving or other equipment.

3. Position and Align the Ramp

  • Remove the ramp from the pallet by unscrewing the four securing bolts.
  • Position the base plate at the rear cargo area, ensuring proper alignment.
  • Measure for clearance:
    • Leave 1.5 inches of space on each side of the ramp.
    • Maintain 4 to 9 inches from the base plate to the edge of the floor for proper placement.
    • Confirm that the van doors close properly without obstruction.

4. Mark and Drill Mounting Holes

  • Hold the base plate in position and mark the drill locations using a marker or punch.
  • Using a drill with the appropriate metal bit, carefully drill pilot holes at the marked spots.
  • Install plus nuts for additional stability, especially in areas where the floor is raised.

Pro Tip: Use a drill stop to prevent over-penetrating the van’s floor.

5. Secure the Ramp to the Van

  • Insert spacers where needed to create a level installation surface.
  • Align the ramp with the pre-drilled holes and secure it using the provided bolts and washers.
  • Have a second person assist from underneath the van to hold the nuts while tightening the bolts from above.

Final Check: Ensure all bolts are tightened securely, but avoid over-tightening to prevent damage.

Once installed, operating the Link LB20 Ramp is simple and effortless.

  1. Unlock the Clamps – Open the securing latches on both sides.
  2. Deploy the Ramp – Grab the handle and pull the ramp outward.
  3. Use the Wheel Kit – Roll the ramp down smoothly to the ground.
  4. Load Equipment – Move cargo up or down the ramp with ease.
  5. Stow the Ramp – After use, roll the ramp back up, lock it in place, and secure the clamps.
  • Prevents Injury – Eliminates the need for heavy lifting, reducing strain on your back.
  • Increases Efficiency – Speeds up loading and unloading, saving valuable time.
  • Maximizes Cargo Space – The bi-fold design keeps the ramp compact when not in use.
  • Durable and Reliable – Built to handle frequent use in tough work environments.

After installing and testing the Link LB20 Bi-Fold Cargo Ramp, we can confidently say it’s an essential upgrade for professionals who rely on their Ford Transit. This ramp offers:

  • A safer, more efficient way to load and unload heavy equipment.
  • A durable, space-saving design that integrates seamlessly with your van.
  • Easy operation with a smooth-rolling wheel kit for added convenience.

At Upfit Supply, we take pride in offering only the best van upfit products. While we don’t manufacture these items ourselves, we carefully select and test products like the Link LB20 Cargo Ramp to ensure they meet our high standards for durability and performance.

Upgrade your Ford Transit today and experience the convenience of a professional cargo ramp!

Order Your Link LB20 Bi-Fold Cargo Ramp Today!

Products Featured In This Video