Secure Your Ford Transit with Slick Locks

When it comes to cargo van security, a high-quality locking system is essential to protect tools, equipment, and valuable cargo. Installing Slick Locks on a Ford Transit Cargo Van provides an extra layer of security without the need for drilling holes or permanent modifications.

Slick Locks are designed for Ford Transit vans, using factory mounting points for a damage-free installation. This guide walks you through the step-by-step installation process, ensuring a secure and professional setup.

Watch the full install video here.

Why Choose Slick Locks for Your Ford Transit?

Unlike traditional padlocks that require drilling holes into your van’s body, Slick Locks integrate with factory mounting points, making installation quick and damage-free.

  • No-Drill Installation – Uses existing factory bolt locations for a secure, hassle-free setup.
  • Heavy-Duty Stainless Steel Brackets – Provides maximum strength and resistance to tampering.
  • Weather-Resistant Puck Locks – Rust-proof aluminum construction with a protective weather shield.
  • Spinner Technology – Prevents lock tampering with wrenches or pry tools.

Step-by-Step Slick Locks Installation

1. Installing the Slick Locks Bracket on the Side Door

The side door lock prevents the sliding door from opening when the puck lock is engaged.

  1. Remove the factory striker plate bolts using a T40 Torx bit.
  2. Position the Slick Locks bracket over the mounting holes.
  3. Mark the bracket’s placement, then clean the surface before applying the included plastic protective sticker.
  4. Reattach the striker plate and bracket using the original bolts.
  5. Ensure a flush fit before tightening everything down.

Pro Tip:
Before securing the lock, slowly close the door to ensure there’s no contact or misalignment between the bracket and lock mechanism.

2. Installing Slick Locks on the Rear Cargo Doors

The rear door setup requires two brackets—one for the driver-side door and one for the passenger-side door.

  1. Prepare the Driver-Side Bracket
    • Position the driver-side bracket over the existing door latch mounting points.
    • Use a sharp razor blade to trim the factory rubber gasket, allowing for a flush fit.
    • Secure the bracket using the provided bolts.
  2. Install the Passenger-Side Bracket
    • Remove the upper and lower factory bolts using a T30 Torx bit.
    • Align the passenger-side bracket with the mounting holes.
    • Secure it loosely to allow for final adjustments later.
  3. Align and Secure Both Brackets
    • Close the rear cargo doors to check for proper alignment.
    • If needed, adjust the striker plate position by moving it back slightly.
    • Ensure both brackets are flush and aligned for a smooth locking mechanism.
    • Fully tighten all bolts once alignment is confirmed.

Pro Tip:
Use a drill bit or screwdriver to check that both brackets line up perfectly before tightening. This ensures the lock pin slides in and out easily.

How to Use the Slick Locks System

Locking the Side and Rear Doors

  1. Place the puck lock onto the bracket hasp.
  2. Ensure the lock pin slides into place smoothly.
  3. Double-check the spinner alignment so it covers the keyhole properly.

Unlocking the Slick Locks System

  1. Press the center of the lock while turning the key to release the pin.
  2. If the pin sticks, slightly push the door inward to relieve pressure.
  3. Turn the key and pull out the pin to remove the lock.

Why Slick Locks Are the Best No-Drill Van Lock Solution

1. Maximum Security Without Drilling

  • Uses factory mounting points, avoiding damage to your van’s body.
  • Eliminates the risk of rust or corrosion from drilled holes.

2. Durable and Weather-Resistant

  • Aluminum puck locks won’t rust, and the stainless steel brackets resist corrosion.
  • Protective weather shields keep dirt, moisture, and debris out of the keyhole.

3. Compatible with Multiple Ford Transit Configurations

  • Works with standard sliding doors and rear cargo doors.
  • Available for dual sliding door models—just choose the correct kit when ordering.

4. Anti-Tampering Features

  • Spinner technology prevents thieves from gripping the lock with tools.
  • Locks secure both the doors and striker plates, preventing forced entry attempts.

Who Should Install Slick Locks on Their Ford Transit?

Slick Locks are perfect for:

  • Contractors & Tradespeople – Keeps tools and equipment secure inside your van.
  • Delivery Drivers – Prevents cargo theft during stops.
  • Fleet & Business Owners – Adds extra security to multiple work vans.
  • Anyone Parking in High-Theft Areas – Deters break-ins with visible, heavy-duty security.

Final Thoughts: Are Slick Locks Worth It for a Ford Transit?

If you need enhanced security for your Ford Transit without drilling into your van, Slick Locks are one of the best solutions available.

  • Easy, no-drill installation using factory mounting points.
  • Heavy-duty stainless steel brackets for maximum durability.
  • Weather-resistant aluminum puck locks with protective shields.
  • Smooth locking and unlocking system with built-in anti-tamper features.

For any van owner looking to prevent break-ins, Slick Locks provide long-term security and peace of mind.

Products Featured In This Video