When it comes to working smarter, secure ladder storage is key. That’s why installing Vantech H1 Ladder Rack for the RAM ProMaster is one of our top-recommended upgrades. In this article, we’ll walk you through the step-by-step installation, spotlight the rack’s standout features, and share expert tips so you can carry ladders with confidence—and keep your workflow running smoothly.

Overview of the Vantech H1 Ladder Rack

The Vantech H1 ladder rack is designed specifically for RAM ProMaster cargo vans. Moreover, it fits both steel and aluminum crossbars. Furthermore, its 2-bar system offers versatile ladder support. As a result, you can carry extension and step ladders without hassle.

Key components include:

  • Universal mounting feet that align with factory-installed T-bolts
  • Steel crossbars with a black powder-coat finish
  • Adhesive rubber bar guards to protect ladder rails
  • Quick-release ladder stuffer with hand-tightened knob

We don’t manufacture this kit. Rather, we carefully select it for its quality and ease of installation.

Why Installing Vantech H1 Ladder Rack on RAM ProMaster Matters

First, hauling ladders inside the van risks damage and wasted cargo space. Therefore, adding a roof-mounted rack frees up interior room. Next, the H1’s sturdy steel frame reduces ladder vibration on the road. Finally, its low-profile design maintains your van’s height clearance. Consequently, you avoid low-garage headaches and meet job-site demands.

Key Features of the H1 Ladder Rack System

When you choose the Vantech H1, you unlock these benefits:

  • Durable Steel Construction: Withstands daily use and heavy ladders
  • Black Powder-Coat Finish: Resists corrosion and blends with your van
  • Adjustable Bar Guards: Snap-on rubber protectors center your ladders
  • Tool-Free Ladder Stuffer: Hand-turn knob secures ladders quickly
  • Universal Fit Feet: Slide over existing T-bolts—no drilling required

Moreover, the Vantech H1 rack accommodates up to 500 pounds of ladder weight, making it ideal for professional use.

Step-by-Step: Installing Vantech H1 Ladder Rack on RAM ProMaster

  1. Prepare Your Crossbars
    First, lay the crossbars on a flat bench. Then, peel the adhesive backing on each rubber bar guard. Meanwhile, center the guard four inches from each end. Finally, press firmly to bond.
  2. Position the Van Outdoors
    Next, move your ProMaster outside. That way, you gain full roof access without hitting garage doors.
  3. Install Mounting Feet
    Then, open each universal foot and slide it over a factory T-bolt. Meanwhile, face the L-bracket flange inward. Afterwards, finger-tighten the lock nuts, allowing bracket movement.
  4. Place Crossbars on Feet
    Now, lift one crossbar onto the front feet. Next, align the second crossbar with the rear feet. Then, loosely install crossbar bolts, washers, and lock nuts. This arrangement lets you adjust spacing for ladder length.
  5. Attach Ladder Stuffer
    After that, slide the quick-release ladder stuffer onto the front bar. Meanwhile, position it near the driver side bracket. Consequently, ladders lean safely against the upright.
  6. Align and Tighten Hardware
    Finally, center your bars on the roof. Meanwhile, confirm equal overhang on each side. Then, torque crossbar bolts to 15 ft-lbs and foot lock nuts to 20 ft-lbs. Also, tighten the ladder stuffer knob by hand.

By following this order, you ensure a secure, rattle-free rack.

Pro Tips for Installing Vantech H1 Ladder Rack on RAM ProMaster

  • Reference Vantech Instructions: Use the manufacturer guide for torque specs.
  • Use Blue Loctite: Prevents hardware from vibrating loose.
  • Test Ladder Fit: Place your ladder on the rack before final tightening.
  • Inspect Periodically: Re-check hardware after the first 100 miles.
  • Maintain Clean Surfaces: Wipe feet mounting points to ensure a solid grip.

Moreover, adding reflective tape to crossbars boosts visibility at night.

Maintenance and Care

After Installing Vantech H1 Ladder Rack on RAM ProMaster, keep it in top condition:

  • Wash Quarterly: Rinse off salt, mud, and debris to prevent corrosion.
  • Inspect Guard Pads: Ensure rubber bar guards remain firmly attached.
  • Retorque Hardware: Verify torque settings every six months.
  • Touch-Up Paint: Spray any scratched areas with black enamel.

These simple steps extend the life of your rack and ladders.

Elevate Your Van’s Capability

At Upfit Supply, we know that Installing Vantech H1 Ladder Rack on RAM ProMaster transforms your van into a versatile, professional workspace. With heavy-duty steel, universal mounting feet, and easy ladder access, the H1 rack delivers on performance and reliability. Ready to boost your efficiency? Explore the product and tutorial below:

With Upfit Supply, you get solutions that work as hard as you do—no exceptions.