Decked Product Categories

Popular Decked Products

Decked makes cargo drawers for every major cargo van and truck model. Find yours below, along with popular Decked accessories. View all Decked products.

Other Decked Resources

Browse our library of resources related to Decked. You can also view our entire resource library here.

DECKED Truck Bed Storage Systems

The DECKED truck bed storage system is the flagship product — a full-width drawer platform that installs in your pickup truck bed without drilling. Two locking, weatherproof drawers slide out from the tailgate for ground-level access to tools and gear, while the composite platform on top supports up to 2,000 lbs. of payload. You keep your full hauling capacity. You gain organized, secure, weatherproof tool storage. No compromises.

DECKED truck bed systems are available for most full-size and mid-size pickups. Confirm fitment by selecting your vehicle below.

Shop all DECKED Truck Bed Storage Systems →

DECKED Cargo Van Drawer Systems

DECKED cargo van drawers bring the same drawer system to full-size cargo vans — a full-width storage platform with two locking drawers that slide out from the rear doors. The platform supports 2,000 lbs. of load capacity on top, so you can carry materials and cargo above while keeping tools organized and secure below. Van systems are available for the Ford Transit, Mercedes Sprinter, RAM ProMaster, and Chevy/GMC Express/Savana.

Shop all DECKED Cargo Van Drawer Systems →

DECKED CargoGlide Bed Slides

The DECKED CargoGlide is a sliding truck bed tray that pulls your entire load out to you — eliminating the need to climb into the bed or reach deep into it. Rated for 1,000 lbs. (CG1000) or 1,500 lbs. (CG1500) depending on the model, and available in 8-foot and 10-foot extensions. The CargoGlide can be used as a standalone bed slide or installed on top of a DECKED drawer system for a complete bed organization setup.

Shop DECKED CargoGlide Bed Slides →

DECKED Tool Boxes

The DECKED crossover tool box uses the same steel-reinforced composite construction as the drawer systems — lighter than steel, tougher than plastic. Designed to integrate with DECKED truck bed storage for a fully modular bed organization system, or stand alone as a premium crossover box. Available in the 2026 version with updated design and fitment.

Shop DECKED Tool Boxes →

Why DECKED?

  • 2,000 lb. platform capacity — You don't give up payload. Haul full loads on top while tools stay organized and protected below.
  • Steel-reinforced composite construction — Significantly lighter than all-steel alternatives without sacrificing structural integrity. Resistant to dents, rust, and UV degradation.
  • Weatherproof locking drawers — Each drawer locks independently and seals against moisture. Tools and equipment stay dry and secure, even in harsh conditions.
  • No-drill installation — DECKED systems use existing tie-down anchor points and require no drilling. Fully removable if needed.
  • Ground-level access — Drawers slide out from the tailgate to waist height. No climbing in the bed, no reaching over the rail, no digging through piles.
  • Modular system — DECKED drawer systems, CargoGlide bed slides, and DECKED tool boxes are designed to work together. Build the setup that fits your workflow.

Who Uses DECKED

  • Electricians — Keep wire, fittings, meters, and hand tools in the drawers and use the platform top to carry conduit and larger materials to the job site.
  • Plumbers & HVAC Technicians — Organize small parts, tools, and equipment in the drawers. The locking system means peace of mind overnight on job sites.
  • General Contractors — Stop digging through a pile of tools every morning. DECKED creates a consistent system so every tool has a home and every stop runs faster.
  • Service Technicians — The cargo van drawer system brings the same organization to service vans, keeping tools accessible and load space fully intact.
  • Outdoor & Recreation — DECKED is popular beyond the trades for overlanding, camping, and hunting setups where organized, weatherproof storage in the bed is essential.

DECKED FAQs

What is the DECKED drawer system?

The DECKED drawer system is a truck bed or cargo van storage solution that installs a full-width platform with two locking, weatherproof drawers underneath. Drawers slide out from the tailgate for ground-level access, while the composite platform supports up to 2,000 lbs. on top — so you keep full payload capacity while gaining organized, secure tool storage below.

How much weight can a DECKED system hold?

The DECKED platform supports up to 2,000 lbs. of payload on top. Each individual drawer is rated for 200 lbs. This means you can continue hauling full loads on the platform while tools and gear stay organized in the drawers beneath.

What trucks does DECKED fit?

DECKED truck bed storage systems fit most full-size pickups — Ford F-150, Ford F-250/350 Super Duty, Chevy/GMC Silverado/Sierra 1500 and 2500/3500 HD, RAM 1500 and 2500/3500, Toyota Tundra, Toyota Tacoma, Nissan Frontier, and Nissan Titan. Fitment is specific to bed length and model year. Use the vehicle links above or contact us to confirm fitment for your truck.

Does DECKED make cargo van drawers?

Yes. DECKED cargo van drawer systems are available for the Ford Transit, Mercedes Sprinter, RAM ProMaster, and Chevy/GMC Express/Savana. The van system uses the same drawer platform design as the truck version — 2,000 lb. platform capacity, locking weatherproof drawers, and no-drill installation.

What is the DECKED CargoGlide?

The DECKED CargoGlide is a sliding truck bed tray that pulls your entire cargo load out to you from the tailgate — rated for 1,000 or 1,500 lbs. depending on the model. Unlike the drawer system, the CargoGlide is a single sliding platform with no drawers. It can be used standalone or installed on top of a DECKED drawer system as part of a modular bed setup.

How does DECKED install?

DECKED systems are designed for DIY installation with basic hand tools — no drilling required. The system assembles inside the bed and secures using existing tie-down anchor points. Most installs take 1–2 hours. The system is fully removable if you need to swap trucks or return the bed to stock.

Is DECKED worth the price?

DECKED systems start at $1,699.99 — a premium price for a premium product. For contractors and tradespeople who load and unload tools daily, the combination of 2,000 lb. payload capacity, weatherproof locking storage, ground-level drawer access, and no-drill installation is genuinely unique in the market. No crossover tool box or loose bed organization system offers the same combination. If daily tool access and security are priorities, most DECKED users say it pays for itself quickly in time savings and reduced theft risk.

Does DECKED make a tool box?

Yes — the DECKED crossover tool box uses the same composite construction as the drawer systems and is designed to integrate with DECKED truck bed storage for a fully modular setup. Available in the updated 2026 version.

Trusted By The Pros At