Vantech

About Vantech

Vantech is headquartered on Long Island, New York, and has been building ladder racks and cargo roof racks for cargo vans and pickup trucks for over a decade. The company's focus has always been narrow by design: aluminum racks for working vehicles, built to fit precisely and install without making permanent modifications. That focus shows in the product lineup — every rack series has a specific use case, a specific mounting approach, and specific accessories designed around it rather than bolted on as afterthoughts.

Vantech racks are vehicle-specific wherever possible, using factory roof studs, drip rail clamps, or bed rail mounts that align with how each van or truck was built. The result is a fitment that looks clean, installs quickly, and doesn't compromise your vehicle's structural integrity or resale value. The packaging is designed around the same philosophy — the racks ship in what Vantech describes as nearly indestructible packaging with all hardware and installation materials included, so you're not sourcing additional bolts or brackets on install day.

The 5-year limited warranty is one of the strongest in the van rack category and applies to workmanship and material defects on registered products. Powder-coated finishes are excluded from rust coverage. Registration is required — unregistered purchases are not covered. Vantech support is available by phone at 631-486-9303 and via online form during regular Eastern business hours.

Which Vantech Rack Is Right for Your Van?

The most common question we get about Vantech is which rack series makes sense for a given van and use case. Here's the short version:

If you're clocking high highway miles and want the quietest, most fuel-efficient setup, the J Series is the answer. Its aerodynamic crossbar profile cuts wind noise and drag in a way that rectangular bar racks don't, and the 400-lb. capacity covers most trades.

If you want no-drill simplicity and a proven clamp-on workhorse, the H1 is the standard choice. The drip rail clamps go on in minutes and the system handles 250 lbs. per bar reliably. Add the H1 Roller Bar if solo loading and unloading is a daily reality.

If you haul oversized, varied, or heavy cargo and want a full roof carrier rather than just a ladder rack, the H2.1 is what you want. The full-length side rails and modular end configurations make it the most versatile system in the lineup, and the side access ladder integration is genuinely useful for roofers and solar installers who need roof access regularly.

If you're running the heaviest loads and want the widest, most substantial rack available, the H3 is built for that. Wider bars, more eyehooks, and steel side supports make it the most secure option for large ladders and heavy daily use.

Not sure which fits your van model? Contact our team or browse by vehicle below.

Vantech Racks by Van Model

• Ford Transit
• Ford Transit Connect
• RAM ProMaster
• RAM ProMaster City
• Mercedes Sprinter
• Mercedes Metris
• Chevrolet Express / GMC Savana
• Nissan NV

Also available for box trucks and trailers in select H1 configurations.

Frequently Asked Questions — Vantech

What is the difference between the Vantech J Series, H1, H2.1, and H3?

All four are aluminum cargo van ladder racks, but they differ in mounting style, profile, and intended use. The J Series is a low-profile aerodynamic crossbar rack (400 lbs., quietest on the highway). The H1 is a clamp-on no-drill rack with a taller rectangular bar profile (250 lbs. per bar). The H2.1 is a full cargo carrier with full-length side rails, multiple crossbar positions, and modular end configurations — the most versatile system in the lineup. The H3 is the heavy-duty option with wider 3" x 1.5" extruded bars, steel side supports, and the widest bases (250 lbs. per bar). For a full breakdown with trade-specific recommendations, see our Vantech Ladder Rack Buyer's Guide in Upfit University.

Does Vantech require drilling to install?

The H1 and H3 are no-drill clamp-on systems — drip rail clamps attach without any holes in the vehicle. The J Series typically mounts to existing factory roof studs on most van models with no additional drilling. The H2.1 uses factory roof studs and may require minimal drilling for some configurations. The P-Series truck rack offers both clamp-on (no-drill) and bolt-on options. Always confirm with your vehicle-specific installation instructions.

What vans does Vantech fit?

Vantech makes vehicle-specific racks for the Ford Transit (all wheelbases and roof heights), Ford Transit Connect, RAM ProMaster, RAM ProMaster City, Mercedes Sprinter, Mercedes Metris, Chevrolet Express/GMC Savana, and Nissan NV and NV200. Some H1 configurations are also available for box trucks and trailers in universal sizing.

What is the Vantech warranty?

Vantech offers a 5-year limited warranty against workmanship and material defects on most products. Registration is required — the warranty does not apply to unregistered products. Powder-coated finishes are excluded from rust coverage. Upfit Supply is an authorized Vantech dealer, and all purchases qualify for the full registered warranty. Contact Vantech support at 631-486-9303 or through their online form during regular Eastern business hours.

What is the Vantech H2.1 and how is it different from a standard ladder rack?

The H2.1 is Vantech's full cargo carrier roof rack system — full-length side rails run the length of the van roof and accept multiple crossbars at adjustable positions. It's 20% lighter than the original H2 with the same rigidity. End configurations (AA clean-end or FD with fog light mount) let you customize the look and functionality. The H2.1 also accepts Vantech's vehicle-specific side access ladder, which integrates cleanly without the extra drilling of a universal rear ladder. It's the preferred system for roofers, solar installers, and multi-trade contractors.

Does Vantech make truck ladder racks?

Yes. The Vantech P-Series is a bed rail ladder rack for pickup trucks — clamps to the bed rail and extends to roofline height without touching the truck bed floor. Rated to 800 lbs., available in clamp-on or bolt-on configurations, and compatible with most full-size pickups.

Does Vantech make cargo van shelving?

Yes. Vantech's SA-series aluminum adjustable shelving units feature aluminum frames with non-slip vinyl-wrapped plywood shelves — approximately 80% lighter than equivalent steel shelves. Available in multiple widths and heights for common cargo vans.