Installing Center Light Bracket on Weather Guard Headache Rack
|
Posted in Installation Videos
If you've got a Weather Guard headache rack and need a place to mount a light bar, beacon, or work light, the Weather Guard headache rack center light bracket is exactly what you need. It gives you a clean, flush mounting surface at the center of the rack — no rigging, no guesswork. Here's how to install it.
What the Weather Guard Headache Rack Center Light Bracket Does
The Weather Guard headache rack center light bracket is a dedicated mounting surface that attaches to the built-in channel on Weather Guard's newer headache racks. It's designed to sit at the center of the rack and give you a solid, pre-drilled location for your light. Whether that's a light bar, a strobe beacon, or a work light, the Weather Guard headache rack center light bracket handles it. It comes with all the hardware you need, including a full installation guide with warnings, torque specs, and a parts list.
You can grab the Weather Guard Headache Rack Center Light Bracket at Upfit Supply.
Step-by-Step Install
Step 1: Review the Installation Guide
Weather Guard includes a full printed installation guide in the box. Read through it before you start. It covers warnings, cautions, torque specs, and the parts list. This is your ultimate source — our walkthrough follows it, but always refer back to yours.
Step 2: Prepare Your Square Bolts
The Weather Guard headache rack center light bracket uses square bolts that slide into the channel on the top of the headache rack. Take your square bolts and drop them into the channel at your desired location. The bracket uses two mounting points.
Step 3: Position the Bracket
Decide where you want the bracket — typically centered on the truck. Slide the square bolts along the channel to line up with the bracket's mounting holes. Make sure it's centered before tightening.
Step 4: Thread and Tighten
Line up your bracket with the bolts in the channel, thread the nuts onto the bolts, and tighten them down to the torque spec in your manual. Once tight, you've got a clean, flush mounting surface ready for your light.
The whole install takes just a few minutes. No drilling, no modification to your rack.
Ready to add lighting to your setup? Get the Weather Guard Headache Rack Center Light Bracket at Upfit Supply.
Weather Guard Headache Rack Center Light Bracket FAQs
Q: Will this bracket fit any headache rack?
A: No — this is designed specifically for the newer Weather Guard headache racks that have the integrated mounting channel on the perimeter. It won't work on older-style racks or third-party racks without that channel.
Q: Can I mount something other than a light on it?
A: Yes. The Weather Guard headache rack center light bracket gives you a flat mounting surface with pre-drilled holes. If it fits and it's safe to mount there, go for it.
Q: Does it come with hardware?
A: Yes. The kit includes all hardware needed for installation, including the channel slider bolts and a full installation guide.
Q: What warranty does it carry?
A: Weather Guard backs this product with their lifetime warranty. You're covered on defects for the long haul.
Get the Weather Guard Headache Rack Center Light Bracket at Upfit Supply — in stock and ready to ship.
Products Used On This Upfit
-
Weather Guard Headache Rack Center Light Bracket
Regular price $112.00Regular priceUnit price per$112.00Sale price $112.00cancel Out of stock.
Vendor:
Sold out
