Unboxing Weather Guard 42" Shelf Back Panel: Create a Lockable Van Storage Compartment
|
Posted in Unboxing Videos
What the Weather Guard 42" Shelf Back Panel Does
The Weather Guard 42" shelf back panel mounts to the back of a 42" wide Weather Guard shelving section and serves two purposes: keeping items from falling out the back of the shelf during transit, and enabling a fully enclosed lockable compartment when paired with a matching shelf door on the front.
The back of Weather Guard's shelving units is open by design, which is useful for airflow and accessibility but leaves a gap that items can fall through if the van stops hard or takes a rough road. The Weather Guard 42" shelf back panel closes that gap cleanly and permanently with no drilling required.
What's in the Box
The panel is a single piece of sheet metal with structural vents pressed into the face for rigidity across the width. The finish is bright white powder coat, matching the Weather Guard shelving units exactly. Pre-drilled holes along the edges line up with existing holes on the shelving frame. Installation hardware is included: serrated bolts, serrated lock nuts, and washers. Serrated hardware resists backing out under vibration, which matters in a van on varying road surfaces all day.
How to Create a Fully Enclosed Lockable Compartment
If you want to turn a shelf section into a lockable, fully enclosed storage cavity, here is the combination:
- Weather Guard 42" shelf back panel (this product) - covers the rear of the shelf
- 42" shelf door - covers the front of the shelf with a locking drop-down door
- The shelf unit's side walls close off the left and right naturally
If you are ordering the Weather Guard 42" shelf back panel specifically to pair with a door, make sure you are getting the 42" door. Width needs to match across shelf, panel, and door for everything to line up. Weather Guard backs this product with a lifetime warranty.
Frequently Asked Questions
Does this require drilling new holes?
No. The pre-drilled holes on the Weather Guard 42" shelf back panel align with existing holes on the shelving unit.
What width shelf does this back panel fit?
This is designed specifically for 42" wide Weather Guard shelving sections. If your shelf is 52 or 60 inches wide, you need the corresponding back panel for that width.
What is the difference between the back panel and the shelf door?
The back panel covers the rear of the shelf. The door covers the front and is the lockable component. You need both to create a fully enclosed compartment.
Is the key for the shelf door the same as other Weather Guard locking accessories?
Yes. Weather Guard uses the RH01 key code across their locking accessories, including shelf doors, the two-drawer cabinet, and partition door handles.
Find the Weather Guard 42" shelf back panel at Upfit Supply. To complete the lockable compartment, add the matching 42" shelf door. For the full shelving system, browse the Weather Guard van shelving lineup.
Products Used On This Upfit
-
Accessory Back Panel, 14.5" tall for 42" Shelf Unit
Regular price $102.61Regular priceUnit price per$102.61Sale price $102.61check_box 500+ in stock. Ships in 1 business day.
