Unboxing Weather Guard's Literature Holder: Keep Documents Organized in Your Work Van Like A Pro

Unboxing Weather Guard's Literature Holder: Keep Documents Organized in Your Work Van Like A Pro

Last updated

|

Posted in Unboxing Videos

What the Weather Guard literature holder Does

The Weather Guard literature holder (part number 9880-3-01) is a van accessory that gives you a dedicated place for documents, folders, or binders inside your work van. Route sheets, job orders, inspection forms, permits - whatever you need to reference or hand off during the day - goes in here and stays accessible without being thrown in a seat or shoved in a door pocket. It mounts to a shelving end panel or to the van's bulkhead partition, keeping documents organized and in a fixed location so nothing slides around or gets buried under tools.

Unlike most of Weather Guard's van accessories, the literature holder is not part of the Red Zone accessory line. It comes in the same bright white powder coat finish as the partitions and shelving units, so it blends cleanly into the build rather than standing out as an add-on.

What's in the Box

The Weather Guard literature holder ships fully assembled. There is no construction required - it comes out of the box ready to bolt in. Hardware is included: four bolts, lock nuts, and washers. A full installation guide is also in the box, which covers exactly how to attach the holder to a shelving end panel or another mounting surface in the van.

The holder uses a simple hanging mount system - a slot at the back slides over the mounting bolts and hangs in place, making installation and future repositioning straightforward.

Dimensions and Mounting

Here are the measurements for the Weather Guard literature holder:

  • Overall width: 13 inches
  • Overall height: 15 inches
  • Overall depth: 4 and 5/8 inches
  • Individual slot opening width: approximately 1 and 1/4 inches
  • Individual slot depth: approximately 6 and 1/2 inches
  • Number of slots: five, plus a lower open area for larger items

The five individual slots are narrow enough to keep folders and binders upright and separated rather than all piling together. The lower open area adds flexibility for a wider document or anything that does not fit in the individual slots.

Need to keep your paperwork organized on the job? Order the Weather Guard literature holder at Upfit Supply. Building out a full van interior? Browse the full Weather Guard lineup to upfit your van.

Frequently Asked Questions

Does this come pre-assembled?

Yes. The Weather Guard literature holder ships fully assembled. You just need to bolt it to the mounting surface - all hardware and an installation guide are included in the box.

What finish does it come in?

The literature holder is in bright white powder coat, matching the finish on Weather Guard van shelving and partitions. It is not part of the Red Zone red accessory line.

Can it mount anywhere other than a shelving end panel?

Yes. It can also mount to a van bulkhead or partition. The included installation guide covers both mounting locations.

How wide are the individual document slots?

Each slot is approximately 1 and 1/4 inches wide and 6 and 1/2 inches deep. There are five slots total plus a lower open area.

Is a full installation guide included?

Yes. A complete installation guide with hardware requirements and mounting instructions is included in the box.

Products Used On This Upfit