Unboxing Weather Guard's Two Hook Holder: Van Accessory for Cords, Hoses and More
|
Posted in Unboxing Videos
What the Unboxing Weather Guard's Two-Hook Holder Does
The Weather Guard two-hook holder is a van organization accessory from Weather Guard's Red Zone line. It mounts to the back of a van shelf, to the partition, or anywhere in the cargo area where you want a fixed place for hanging equipment. Extension cords, air hoses, straps, or whatever you are currently throwing on the floor or draping over a shelf edge - this is where those go. Two hooks, fixed mount, simple but purpose-built for the job.
The Red Zone accessory line uses Weather Guard's accent red powder coat finish rather than the bright white used on their shelving and partitions. The red color makes accessories easy to spot in a dark cargo area and adds a clean visual contrast to the white shelving build.
What's in the Box
The Weather Guard two-hook holder comes packaged in plastic wrap to protect the powder coat finish. Hardware included: two button-head screws, two washers, and two lock nuts. A generic installation guide for Weather Guard end-panel accessories is also included. It is not product-specific but covers the basic mounting process for this type of accessory - line up with existing holes on the end panel or drill new ones and tighten the bolts. The whole install is a few minutes.
Dimensions
Here are the measurements for the Weather Guard two-hook holder:
- Overall mounting plate width: 9 inches
- Overall height: approximately 8 and 1/4 inches
- Hook width: 1 and 1/8 inches each
- Center-to-center spacing between hooks: 6 and 5/8 inches
- Space between hooks (inside clear): 5 and 1/2 inches
- Projection depth from wall: 5 inches
- Mounting hole spacing: 6 and 1/2 inches on center (three mounting holes total for positioning flexibility)
The 5-inch projection depth is useful to know if you are running a tight van build and need to confirm the hooks will not prevent you from closing the rear or side doors. Measure the available clearance before installing, especially if the mount location is near a door edge.
Weather Guard makes several Red Zone accessories with similar mount patterns - the installation process for the two-hook holder is the same as the three-hook cord holder and other end-panel accessories in the lineup.
Ready to get your cords and hoses off the van floor? Order the Weather Guard two-hook holder at Upfit Supply. Looking to build out the full van interior? Browse the full Weather Guard lineup to upfit your van.
Frequently Asked Questions
What finish does the two-hook holder come in?
The Weather Guard two-hook holder is in the Red Zone red powder coat finish, not bright white. Red Zone is Weather Guard's accent accessory line for van organization accessories.
Where can I mount this in the van?
It mounts to a shelving end panel, to the van partition, or to any flat surface in the cargo area where you can run the two mounting bolts. Three mounting holes give you some positioning flexibility.
How deep do the hooks stick out?
The hooks project 5 inches from the mounting surface. If you are working in a tight van build, measure the available depth at your intended mount location before installing.
What hardware is included?
Two button-head screws, two washers, and two lock nuts. A generic installation guide for Weather Guard end-panel accessories is also in the box.
Does Weather Guard make a three-hook version?
Yes. Weather Guard also makes a three-hook cord holder in the Red Zone line. The mounting process is the same. Check Upfit Supply for both options.
Products Used On This Upfit
-
Two Hook Holder, 5in diameter
Regular price $16.27Regular priceUnit price per$16.27Sale price $16.27check_box 100+ in stock. Ships in 1 business day.
